wholesale custom hip hop jewelry
4 thoughts on “wholesale custom hip hop jewelry How to make virtual machines use external network IP”
Leave a Comment
You must be logged in to post a comment.
Shopping Cart
wholesale custom hip hop jewelry
You must be logged in to post a comment.
wholesale fashion jewelry flower earrings The bridge mode above the upstairs cannot be realized if it does not use the routing or the firewall implementation port mapping. The network card mode of the virtual machine is set to the bridge mode, and then the port mapping on the router or using 2003 to make a soft route to implement the port mapping function.
It without routing and firewall, if you want to achieve your needs, you can only select the NAT mode on the virtual machine network card mode, but this setting is a bit complicated:
1. After setting the NAT mode, find it to find the NAT mode, find found The IP address of the virtual machine, the network card of the virtual machine is DHCP mode, please enter the virtual machine to find the IP address of the virtual machine;
2. Click "Edit"-> "Edit Virtual Network" on the main interface of VMware;
3. Open VMware's virtual network card editing interface. Find the mode of Nat's virtual network card. After clicking, then click Nat Settings below;
4. In the tab of nat settings, find the content of Port In the label, fill in the port, the port protocol type, the IP address of the virtual machine, the port of the virtual machine, the port of the virtual machine, the port of the virtual machine. After setting, press OK to return to the main interface of the virtual machine all the way;
6. When setting, the port of the Host Port must be the port where the real machine is not monitored, otherwise the error will be made; Using the netStat command to see the real machine has listened to the newly filled port, and the program that monitors the port is vmnat.exe.
quality stainless steel jewelry wholesale 1. Set all virtual machines to bridge.
2, IP network segments are set in the same network segment; for example: 192.168.3.1, 192.168.3.2, and so on.
2, treat the virtual machine as a real machine, set a fixed IP, and to the external network.
wholesale silver findings for jewelry Solution:
1. View the name of the network card equipment of the real machine, see which network card is connected to WAN.
2. Edit the virtual virtual network of the virtual machine
3.
4. Because it is an automatic bridge connection, the virtual machine defaults to the first network card bridge. And my real machine is#2 to connect the outer network. Therefore, the network that needs to specify the bridge here is#2.
5. Modify the network card mode of the virtual machine to be Bridged mode.
6. Configure an outer network IP to the virtual machine and test whether to ping the outer network. Application. Test through.
7. In addition, if you still set Auto, you can click on the right side to set up a bridge to connect to a few network cards. There are multiple network cards to choose from.
wholesale jewelry china free shipping Software name: Rabbit! ~ Zizi dynamic IP
Software language: Simplified Chinese
Software category: network acceleration
Operating environment: WinXP/Vista/Win7/Win8/Win10/mobile phone
Please adopt