Installation steps for multi-purpose shower room and bulk shower steamers:
1. Determine the installation position of the whole shower room, adjust the foot screws of the bottom basin, find the level of the bottom basin, and connect the water pipe; then the bottom basin water test, check whether there is water leakage phenomenon, (if the installation is completed and then the water test, once found leakage, maintenance is more complicated) the backplane and shower screen with stainless steel screws fixed on the back of the bottom basin.
2, assembly on both sides of the fixing plate, also fixed with stainless steel screws.
3. Assemble the fixing glass of the front shower screen and insert the sealing strip into the joint between the glass and the frame on both sides.
4. Hang the movable door, assemble the top cover, seal the edge with special mildew proof glass glue, access the power supply, and try the computer section.
5, the connection of hot and cold water mouth should be connected with 90 degrees pure copper elbow and the wire for water supply, to avoid the direct use of the wire connection bent hose caused by poor water supply, water supply trial, check whether water leakage.
6. Insert the sewer pipe into the sewer pipe, seal the water mouth around with glass glue, and the installation is completed.
How to maintain a multifunctional shower room
Multifunctional shower room and ordinary shower room its maintenance methods and precautions are similar, the specific cleaning and maintenance precautions are as follows:
I. Cleaning of the shower room:
Use a soft dry cloth when cleaning the walls and basin of the shower room. If there is slight dirt, please wash it with a soft cloth or sponge soaked with neutral detergent. When removing stubborn dirt, please wash it with alcohol.
When using bathroom detergent, be sure to use it properly according to the instructions on the container. The wrong use method will produce adverse effects on the human body, and easily make the product appear in some adverse conditions.
Do not use the following items for cleaning: acidic, alkaline solvents, drugs (such as hydrochloric acid), acetone diluent and other solvents, decontamination powder, otherwise it will have adverse effects on the human body, and will cause some adverse conditions of the product.
Two, shower room maintenance:
Use and maintenance of pulley:
1, push-pull shower door, there are two ways of sliding block and sliding wheel.
2. Problems that should be paid attention to in the use of pulley and slider:
A. Avoid crashing into the movable door with force below, so as not to cause the movable door to fall off.
B. Pay attention to cleaning the slide rail, pulley and slide block regularly, and fill with lubricant (lubricating oil or lubricating wax).
C. Adjust the adjusting screw of the slider regularly to ensure the effective bearing and excellent sliding of the slider to the movable door.
Maintenance of tempered glass:
1. Do not hit or impact the glass surface with sharp objects to avoid damage.
2, is not to use the day water corrosive liquid to wipe the glass surface, so as not to destroy the surface luster.
3. Do not wipe the glass surface with rough materials to avoid scratches.
Maintenance of aluminum alloy frame:
Electrostatic spraying products (white, bone color, blue, yellow, red, purple and other solid spray):
1, to prevent direct sunlight and blast, because the resin material and color-based powder will produce photosensitive reflection, resulting in the color of the spray layer fading.
2. Do not wipe with corrosive liquids or materials.
3. Do not wipe the surface with rough materials (including toothpaste).
4, can not use sharp objects to depict the surface. If there are stains on the surface of the aluminum, wash it with neutral water and then wipe it.
Oxidation coloring products, (refers to gold, silver, Asian silver, brushed silver and other surface coloring):
1, this kind of product is not easy to fade compared with electrostatic coating products, but its hardness is poor, thus especially can not use rough materials to wipe the surface, more can not use sharp objects to depict the surface.
2. If there are stains on the surface of aluminum, please wipe it with neutral wash water.